AT825 OnePoint® X/Y Stereo Field Recording Microphone

Designed for broadcast, professional recording, and DAT field use, Audio-Technica’s compact, lightweight AT825 is perfect for camera-mount applications. The microphone is equipped with two balanced outputs for use with professional audio and video equipment. Its closely matched elements provide the spatial impact and realism of a live sound field. With switchable low-frequency roll-off the versatile AT825 operates on either battery or phantom power.

Designed for broadcast and professional recording, and DAT field use

Compact, lightweight design is perfect for camera-mount applications

Closely-matched elements provide the spatial impact and realism of a live sound field

Switchable low-frequency roll-off

Operates on battery or phantom power

Includes a 16.5' (5 m) cable (5-pin XLRF to two standard 3-pin XLRM connectors)

SPECIFICATIONS
ELEMENTS	Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN	X/Y Stereo
FREQUENCY RESPONSE	30-20,000 Hz
LOW FREQUENCY ROLL-OFF	150 Hz, 6 dB/octave
OPEN CIRCUIT SENSITIVITY	-47 dB (4.4 mV) re 1V at 1 Pa
CHANNEL BALANCE	<=2.5 dB
IMPEDANCE	200 ohms balanced
MAXIMUM INPUT SOUND LEVEL	126 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical)	102 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO	70 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS	5-52V DC, 2 mA typical (each channel)
BATTERY TYPE	1.5V AA/UM3
BATTERY CURRENT / LIFE	2 mA / 1000 hours typical (alkaline)
SWITCH	Flat, roll-off (recessed)
WEIGHT	8.5 oz (240 g)
DIMENSIONS	8.43" (214.0 mm) long, 2.44" (62.0 mm) head width, 0.83" (21.0 mm) body diameter
OUTPUT CONNECTOR	Integral 5-pin XLRM-type
CABLE	16.5' (5 m) long, 8 conductors under two shields, vinyl-jacketed, stereo cable with 5-pin XLRF-type connector at microphone end, two 3-pin XLRM-type connectors at output end
ACCESSORIES FURNISHED	AT8405a stand clamp for 5/8"-27 threaded stands; battery; AT8120 windscreen; soft protective pouch
AUDIO-TECHNICA CASE STYLE	S3